WORKING PRINCIPLE
Stirring system is special designed of 3 stirring blades. It is driven by the gearing device and rotated under a certain speed, so that the materials are mixed under a regular screwed movement. Because stirring blades are well matched to the bottom of the drum, even the lowest materials can be mixed perfectly.
After the raw materials were well mixed and moistened, it become soft and some of them are conglomeration. They were cut by the high speed rotation cutting knives (4 r...
>>
Main uses:
This machine is consisted of main motor, auxiliary moto,and electrical control contorl cabinet with the capabilities of winnowing,noo-sieve or mesh,equality of ganule size,and continuousprocessing etc.It meets the international advanced level and is suitable for the material grinding by the trade of pharmaceutics,chemical,and foodstuff etc.
For more information please contact us: 85xianji at 85xianji dot com.
Hopeland Chem-Tech Co., Ltd.
>>
The machine is usde in pharmaceutcal,chemical,food industries.It presses vaious granular raw materiais into normalciraular tablet and abnormal tablet.Charateritics:The machine is a double press type,continuously automatic tablet press for pressing granular raw materials into tablet.The outside part of the maching is fullyenclosless steel,which can keep gloss and prevent the cross pollution and meet G.M.P requirement.It has transparent windows so that the press condition fully so that it is easy ...
>>
The light-touch switches, feeding propeller and filling rotary table can be in automatic run based on preset and frequency speed control.
Reducing the packing cost due to high application and runon.
Without traditional gearbox, it is simple in structure and easy to make maintenance.
Keeping balance of filling amounts on both sides.
Note: The vacuum pump and air compressor are attached with the machine.
1) Max. production capacity: 22,500 granules/h
2) Suitable capsules: #00-4
3) Ove...
>>
Procedure:
1) Forming film unwinding system
2) Plate heating system
3) compressed air forming station
4) Filling device (Automatic or manual)
5) Cover foil unwinding system
6) Guide rails
7) Sealing station
8) Punching station
9) Waste winding unit
Optional accessories:
1) Slitter station or perforation station
2) Auto feeding device for capsule with orientation
3) Vibrator auto feeding device for tablet /caplet
4) Missing check and discharge conveyor device
5) Safety guard...
>>
DPP-138A AL-PVC Blister packing machine with variable frequency speed regulating, air cushion heat-sealing, PC circuit control and adjustable travel, adopts manipulator grip and is equipped with inching device with accurate synchronization and exquisite design. So it's an essential machine for producing and packing tables, capsules and deformed objects in pharmaceutical plant.
Main technical parameters:
1) Punch frequency: 20 - 40 times/min
2) Packing efficiency: 2,400 - 7,200 plates/hour
...
>>
ZG and WG series storage tank is used for storage of medicinal chemicals or solvents. It is made of 304 or 316L high-quality stainless steel. The internal wall is polished to Ra 0.28mm and smooth everywhere. The external surface is polished dull smooth. It is equipped with man hole, sterile filter, CIP cleaning ball and pure steam steril-ization hole. Heating, heat preservation, cooling devices and digital display devices for temperature and liquid level may also be supplied as required by custo...
>>
Adopt technology in the third generation of ozone --PEM electrolysis ozone generator, low-voltage electrolytic pure ink obtain the ozone. Output ozone density and purity high (whether air ratio by weight 18~20%), include poisonous leftovers (such as nitrogen oxide ) any service life as long as more than 8000 hours. The products are reasonable in design , easy and simple to handle, accuse of the circuit system while combining the microcomputer of advanced technology, it can set for working time a...
>>
Characteristics:
Adopting a high-accuracy servo control system from Germany’s Rexroth;
1. This machine can produce products of different specifications after changing the die cutter and setting parameters without changing driving device.
2. Contraposition of color labels on the outer packaging.
3. It can coat and dot online.
4. Automatic weeding out the waste raw materials.
Tel: 0086-371-63605298
Fax: 0086-371-63605296
Post Code: 450001
E-mail: yunhe(AT)chinayunhe.com
Skype: y...
>>
Main technical parameter
Item
Type
range
Assembling
speed
Synchronous
control
Adjust
speed
Exhaust
air
Overall
size
weight
Power
Assembling machine
of syringe
QYS102
50-120
round screen
90
pcs/min
Photoelectric
switch
Frequency-
Speed motor
Pneumatic
Gun
4.5x1.08x1.35
620kg
220V
50Hz
>>