This plant is apply to regenerate and purify the used insulation oil such as transformer oil, switch oil, mutual inductor oil and so on. It can remove water, gas, particle, free carbon, deep oxides and so on. Also it can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function.
(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disp...
>>
This oil purification plant is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil. This product, which can rapidly and effectively remove the water, gas and impurities, aim at turbine oil’s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil’s nature.
(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil ...
>>
LYE series is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It cannot only remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life o...
>>
The ZN Oil regeneration system (Model ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers especially for the power, which is over 110KV. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate fi...
>>
Model TYA oil purification plant can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, flash point and improves the oil capability. Guaranteed the hydraulic system, dynamic system and lubricating system running normally. The machine is suit for many lines, such as mine, metallurgy, electric power, transportation, manufactures and so on. Regenerate the use...
>>
IIJ series fully automatic oil tester is designed as per the requirement of IEC165 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. The tester is suitable for testing of the strength of i...
>>
Application:
This type of machine can degas, dewater, removing the impurities of insulating oil quickly and effectively. It improves the value of voltage value, and make sure electrical equipment work safely. The power station and mine mainly use the machine to deal with transformer oil, mutual inductor oil, switch oil and so on.
>>
It is specialized for the turbine oil which water content is very high, hydraulic oil, refrigerating machine oil and another lubricating oil which need to remove a lot of water to realize to filter the little tiny impurities.
High and New Technology: Molecule emulsion breaking, thin film evaporation. It is have high capacity in dewatering and emulsion breaking. It can remove a lot of water from the oil and also can filter moisture from it.
Purifier is particularly fit to treatment to high ...
>>
Product Description
1. With 3-stage filtration, primary filter(80micron)+secondary filter(20micron)+fine filter(5—10micron);
2. No need oil filter paper and cause no contamination to the ground;
3. To be used for filtration of harmful impurities in oil;
4. The filter elements are made of stainless steel wire mesh, no need to replace, but needs to be clean by special cleanser sometimes (period for cleaning it based on your oil’s dirty);
5. Small and flexible size which is easy to operate...
>>
1. Dehydration large amount of water or minimum water as well as degas containing in oil;
2. Remove out acid, residuals, particles and other related impurities in oil;
3. Upgrade waste oil color to refresh or new oil color while keeping property & function of oil;
4. Applied to kinds of waste/used oil, including engine oil, lube oil, lubricant oil, motor oil, ship oil, hydraulic oil, car oil, inter combustion oil, etc.
5. With its recycling features, has been exported to Singapor...
>>