sintered Nd-Fe-B, cast and sintered AlNiCo and sintered SmCo (SmCo5, Sm2Co17) of four series widely which are used in aviation of electroacoustics, instruments, computer, electronics and other extending fields. Especially, the grade of sintered Nd-Fe-B covers N35, N38, N40, N50, 30H, 33H, 35H, 45H, 30SH, 33SH, 45SH, 27UH, 38UH, 38EH and so on. Many high-tech enterprises like these produces very much. >>
Smco (Samarium Cobalt) magnets are highly resistant to corrosion and require no special surface treatment. This makes SmCO magnets an excellent choice for compact designs where high temperature environments may be required >>
Rubber fridge magnets with fashionable appearance and special designs are getting increasingly popular through the world. Currently, we have advertising fridge magnets, calendar fridge magnets, notepaper magnets, thermometer fridge magnets, dispensing fridge magnets, magnetic figures, magnetic photo frames, magnetic maps, funny faces and many other series. >>
AlNiCo magnets Excellent temperature stability, high residual induction, and relatively high energies characterize Alnico materials, composed primarily of alloys of Aluminum, Nickel, and Cobalt. They are manufactured through either a casting or sintering process. >>
Permanent ferrite magnet is made of Sro or Bao and Fe2O3 by ceramic processing technology, now, we have 6 models of permanent magnet products, namely Y10T, Y20, Y25, Y30, Y30BH, Y35 and etc. The products include rings, disks, blocks, and segments. >>
bonded AlNiCo magnet is a precipitation hardened permanent magnet and possesses not only high coercive force but also stability of residual flux density on the temperature and aging effect. They also have excellent size tolerance and mechanical strength. >>
Using patterns and simple moulding techniques, Alnico magnets can be cast to form a vast range of complex shapes and sizes at an economical cost
Eclipse Magnetics Alnico magnets are ideal for high temperature applications up to 550?C
Alnico is very stable, has good corrosion resistance and a typical hardness of 50 Rockwell C. Once cast, the material is so hard that the only machining possible is grinding
Cast Alnico represents the most versatile magnet material available. The range o... >>
Bonded NdFeB is produced by a technique whereby a special form of NdFeB powder is blended with a plastic carrier material, die pressed and then heated. Parts made in this way can be of complex shapes and come off the tool with close tolerances, requiring no further finish machining. They have lower energy products than Sintered NdFeB - in the range of 10 MGOe. The Bonded NdFeB materials are isotropic - i.e. they can be magnetized in any direction. >>
The magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing. We supply the magnetic ferrite powders in three forms: Granular powder (6-12mm), coarse powder (3-6um), fine powder (0.75-1.05um) according to the needs of clients. The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder. Anisotropic magnetic ferrite powder has better orientability. >>