Year of Manufacture: 1981
Nominal Pressure: 5000 Ton
Slide stroke, mm 1100
Slide speed, mm/s
idle down stroke: 150
working stroke at 1 stage of force: 25,6
working stroke at 2 stage of force: 12,8
working stroke at 3 stage of force: 8,5
during maneuverable move: 100
Max. distance between table and slide (daylight), mm 2600
Table dimensions, mm
left-to-right, 3500
front-to-back, 2800
Table stroke, mm 2850
Table speed, mm/s
out of press 270
in... >>
Hydraulic Long Cartridge Casing Press (Heading Press)
Nominal force: 4000 Tons
Ejector force: 48 Tons
Ram stroke: 200 mm
Ejector stroke: 400 mm
Shut height (passage): 1400 mm
Pressings per minute: 3
Max length of semi-mfgd pdt: 1200 mm – fi: Ø 380/250
Electric motors output: 280 kw
Net weight of press: 223.500 kgs
3-Column down acting oil hydraulic press built new in 1982. It was producing long cartridge casings and is in very good working condition.
It has a movable ... >>
Year of Manufacture: 1992
BLOWFORMER
Blowing energy (adjustable): 5 –16 kJ
Stroke per ram: 190 mm
Die size LxWxH: 340 x 160 x 90 mm
Shim when machining dies under min height
Compressed air
For rams (max): 10 bar
For automatics (max): 5,5 bar
Air consumption (compressed air)
For rams (approx.): 0,5 m3/h
For automatics (approx.): 13 m3/h
Cooling water requirement: 5 m3/h
(for an inlet temperature of 25o C)
Connecting power: 82 kW
WeightMachine (appro... >>
KELLER RE-3013 Range of diameter – 10,0 ÷ 22,0 [mm]
KELLER RE-7010 Range of diameter – 60,3 ÷ 104,0 [mm]
DREISTERN PI-812 Range of diameter – 6,0 ÷ 20,0 [mm]
DREISTERN PI-1611/1 Range of diameter – 17,2 ÷ 57,0 [mm]
DREISTERN PI-1611/2 Range of diameter – 17,2 ÷ 57,0 [mm]
DREISTERN PI-1611/3 Range of diameter – 17,2 ÷ 57,0 [mm]
DREISTERN PI-1611/4 Range of diameter – 30,0 ÷ 76,1 [mm]
DREISTERN PI-1609 Range of diameter – 30,0 ÷ 76,1 [mm]
DREISTERN PI-2011 Range of ... >>
YEAR 1973
- Table size 8.750 mm
- Turning diameter 12.500 mm
- Turning height max. 5.000 mm
- With movement of crossbeam of Maximum 9500 mm
- Table load max. 200 ton
- Turns of Table: 11 turns/min
- Two tool carrier with axes X – Z Hydroscope and angular regulation over that plane
- Independent additional tool turret with X-Z movement
- Weight 700 Ton >>
Manufacturer: Italian Made
Model: 8000T/V
Year of Manufacture: 1992 unused
Condition: As new, dismantled. All electric parts are missing.
Rated tonnage: 8000 Ton
Rated tonnage at opening: 250 Ton
Ram stroke: 2500 mm
Daylight: max.4500 mm – min. 2000 mm
Bed - front-to-back: 3500 mm
Bed - left-to-right: 2700 mm
Useable dimensions of Bed: 2500 x 3500 mm
Ram diameter: 2000 mm
Columns diameter: 630 mm
Speed of accelerated motion (down/up): 500/500 mm/s
V max./V rated pressure: 35/3... >>
GFM Radial Forging Machines available:
GFM SS-412
New in 1986
Machine sporadically used. Good condition
GFM SX-16
New in 1973
Machine under power. Good condition
GFM SP-35/2
New in 1974 / 92
Good technical condition (General retrofitting in 1992)
GFM SX 40
New in 1973
Machine under power. Good condition
GFM SX-55
New in 1991
Machine is still in original Boxes – never installed
Technical information and photos on request. >>
New in 1978
- Machine has been used sporadically – excellent condition
Max rated tonnage: 1.000 tons
Ram stroke: 1.000.mm
Shut height: 1.700 mm
Ram adjustment: 100 mm
Ram strokes per minute: 20 spm
Distance between uprights: 2.600 mm
Bolster dimensions: 1.900 x 1.130 mm
Ram face dimensions: 2.200 x 1.120 mm
Lower (bed) knockout stroke: 229 mm
Main engine power: 250 kw
This is a High Precision Transfer type Forging Press that is currently set to produce parts as Valve... >>
